Wrist Action Separatory Funnel Shaker Takahe’s new addition to the sample preparation instruments is the Wrist Action Shaker also commonly known as the Separating Funnel Shaker. This shaker is efficient in shaking reagents of various kinds of materials under same control parameters. It is suitable for organic, inorganic chemical, medical, and pharmaceutical research, extraction & development of media, and waste water analysis. Up to 6 Funnels of different capacity (from 50 mL to 250 mL) can be fixed simultaneously with specially designed adjustable funnel holder. The BLDC motor is low noise and maintenance free, the acceleration is electronically buffered avoiding jerks, the RPM is dynamically displayed and the stop at the home position makes it easy to add solvents and release gas generated during the shaking process. Technical Specifications Maximum Number of Samples- 6 Sample volume- 50 mL to 1000 mL Max no. of samples / station- 3 Stroke per Minute- 15 to 150 Time- 1 to 999 Minutes Pulsed- On / Off Times can be set 0 to 999 Seconds Stroke Angle- Adjustable in 5 steps Mechanically Other Details Control Microprocessor Keys Tactile Switches BLDC Motor Noiseless and maintenance free Wattage 120 Watts Voltage 110 to 220 Volts

A Nitrogen generator produces nitrogen gas from compressed air. Nitrogen is a colorless gas that makes up 78% of the Earth's atmosphere. It is non-flammable and non-reactive, making it an ideal gas for many industrial and commercial applications. Productive time of analysts and users spent in follow-up for cylinder procurement, change and daily installation of cylinders are eliminated. In operations, cylinders having high cylinder pressure creates a safety issue which is also now addressed with the Nitrogen Generator. With high requirement of Nitrogen for the Nitrogen evaporator and Nitrogen Solvent concentrator, the Nitrogen Generator is a simple solution for tedious logistics, high cost of cylinders and vendor dependency. PSA Nitrogen Generator PSA nitrogen generators use a pressure swing adsorption (PSA) process to separate nitrogen from oxygen in the air. PSA Nitrogen Generator uses two towers filled with carbon molecular sieve (CMS). The "online" tower is filled with compressed air that flows through the CMS. Nitrogen passes through the CMS while oxygen and other trace gases are absorbed. Once a pre-set time has passed, the on-line tower automatically switches to regenerative mode, venting contaminants. In contrast to ordinary activated carbon, carbon molecular sieve has a much smaller range of pore openings. Nitrogen molecules are too large to enter the CMS, so oxygen penetrates the pores and we get pure Nitrogen. Our nitrogen generators are delivered as complete systems, complete with air filters and automatic controls to hook up to a compressed air supply. Start up your PSA Nitrogen Generator by switching it on, and you're ready to start. Also, maintenance is easy. PSA Nitrogen Generator filters only need to be changed once every six to twelve months, depending on your usage. Intelligent Control Our in-house developed software process controller generates the output of Nitrogen by optimising the functions to increase compressor life and reduce running costs over long periods of use. Switching to Nitrogen Generator is a wise decision Recover your operating expense by investing in your capital. Clean particulate free nitrogen with certified purity. Nitrogen supplied on demand. No dependency on vendors and maintenance man-power. Eliminate periodic logistics of cylinder procurement. Features of Nitrogen Generator Silent and seamless Nitrogen gas supply to your lab. Compact non-obstructive design with the option of wall-mounting and free up precious space. In-built service features to indicate timely routine maintenance. Automatically switches to standby mode when Nitrogen is not required - thereby reducing wear & tear of the compressor. Advantages of Nitrogen Generator? Reduced costs: Nitrogen generators can be a more cost-effective option than buying nitrogen gas from a supplier. Increased safety: On-site nitrogen generation can help to improve safety by reducing the need for nitrogen gas cylinders, which can be a safety hazard if handled by untrained personnel Increased convenience: Nitrogen generators can provide a convenient and reliable source of nitrogen gas, which can be used on demand. FAQ- What makes us different from other Nitrogen Generator companies? There are several factors that make us different from other Nitrogen Generator. One factor is our experience. We have been designing, manufacturing, and selling Nitrogen Generator for over 4 years. With discussions with our users we have a deep understanding of their needs helping us to provide them with high-quality products and services. Our Nitrogen Generator has a dedicated design team and manufacturing team. We have a strict quality control system and professional testing equipment and we have a strong R&D team. Another factor that makes us different is our commitment to customer service. We have a team of highly trained and experienced customer service representatives who are available to answer any questions that our customers may have. We also offer a 100% satisfaction guarantee on all of our products and services.

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. Product Features • Available with compliance documents. • User adjustable orbit length (amplitude). • Time, RPM, Pulse Time (ON time as well as OFF time, both are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. • Easy Installation and operation • Aluminium Sample Platform for rust control • Incubator temperature selectable -controlled chamber • Easy Mounting and Removing of labware design • Maintenance Free Product Specifications RPM 10 to 300 (in Real Time) Timer 999 Minutes Pulse Yes Pulse On Off Time 999 Seconds Control Microprocessor Display 4-line 20-Character LCD White Backlite Supplied with Power cord / Rack Covers / Manual / QC Report Included QC docs with attached traceability Electric Requirement 230 V 50 Hz Single Phase 3 Amps Compliance Documents IQ OQ PQ can be provided on site Dimension LXWXH 50 X 20 X 26 CMS Product Weight 8 Kgs

Reciprocating Shaker Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. We have included a online RPM display, easy to programmer controller software, and easy to mount any type of laboratory glassware. Technical Specifications RPM/Stroke/ Range : 15 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 15mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Sample Platform : Platforms available for different lab glassware as mentioned below: Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing)

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence,they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. We have built in many features that make them different from the regular shakers available in the market. We have included an online RPM display, easy to programme controller software, and easy to mount any type of laboratory glassware. We manufacture these Shakers in India. The whole bouquet of shakers are available, Orbital, Reciprocating, Rocking, Dancing. • The orbit length, reciprocating stroke, and amplitude, etc is adjustable on site by the customer in all these shakers • Time, RPM, Pulse Time (ON time as well as OFF time, both are adjustable) all are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. These Free-Standing Shakers can be mounted with an incubator to maintain temperatures for the process. Technical Specifications RPM/Stroke/ Range : 10 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 8mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Power : 120 to 230 Volts Sample Platform : Various platforms available for different lab glassware Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing) *Does not include Glassware.

Product range for Nitrogen Evaporator : Nitrogen Evaporators are used to prepare samples for analysis. In a lot of industries, such as food, biotechnology, analytical chemistry, petroleum, and environmental science, nitrogen evaporators dry and concentrate samples so they can be tested with mass spectrometry, gas chromatography, and HPLC. It is also possible to use heat in conjunction with nitrogen blowdown to eliminate moisture from samples after they have been loaded into the nitrogen evaporator. Various Nitrogen evaporators are used such as one wet or dry baths, whether it needs hood space, and whether it provides heat and nitrogen blowdown to evaporate the samples. These come as 15 positions, 50 positions, High Volume 9 positions, End-point evaporators, 100 position Nitrogen Evaporators and 144 position Evaporators Sample preparation is an important part of the analysis using instruments like LCs, GCs, LC-MS, GC-MS, Elisa Readers. Part of sample preparation is concentration using Nitrogen Evaporators and Nitrogen Concentrator Sample Concentrators. Nitrogen Evaporators are also called N2 Evaporator or Sample Concentrator. Concentration of non-heat sensitive samples uses evaporation as a method to achieve best results. This concentrated sample gives better results when analysed. With individual laboratories using different samples, methods and analytical techniques, Takahe Analytical Instruments® are pioneers in Nitrogen Evaporators and Concentrators in India to meet the needs of the user and their applications. The product range allows evaporating samples from well-plates, test tubes, End points tubes, flasks and beakers. The product also is extended to evaporate large sample batches used in Phase II and Phase IV trials – typically the 100 position and 144 sample Nitrogen Evaporator Our forte lies in offering the user what he requires. Customisation of the product is done on specific customer needs. This customisation is undertaken after a feasibility study to ensure there is no compromise on the end result. Once a method is set, the automated operation of the SpeedoVap, Min-eVap, Bio-eVap, Duo-eVap and other range of our Nitrogen Evaporators and Concentrators frees up critical lab resources for other productive needs. Features of Speedovap N2 Evaporators : 1.Unattended operation for up to 50 samples 2.Different interchangeable N2 Evaporators racks available for tube sizes from 1.5 mL to 30 mL 3.Controlled water bath adjustable from ambient to 80 °C 4.Built-in nitrogen regulator 5.Different process and alert alarms 6.LED display for better visibility under fume hood 7.Convenient size—no hood space required 8.Exhaust open to atmosphere or within Fume Hood 9.Easy to use water drain pump 10.Small footprint FAQ's What is the lead time for delivery after placing order for N2 evaporator? - Our nitrogen evaporators are typically ex-stock and dispatched immediately. However, if there is a specific rack requirement, we will require 2-3 weeks time to meet the customized requirement. How Much Nitrogen Is Required to Evaporate Samples in A Nitrogen Evaporator? - Our 144-position nitrogen evaporator requires only 220 -250 lpm of Nitrogen (1.6 lpm) and our Speedovap 50 position requires 150lpm Nitrogen (3 lpm per nozzle) What sets your Nitrogen Concentrator Sample Evaporators apart from others in the market? - At Takahe Analytical Instruments, we take pride in several factors that distinguish our Nitrogen Evaporators from other brands in the market: 1. Decades of Experience 2. In-House Design and Manufacturing 3.Optimum Nitrogen Utilization 4.Commitment to Customer Service How are samples concentrated in the Nitrogen Evaporator? - Concentration of non-heat sensitive samples can be achieved through evaporation using nitrogen evaporators, also known as N2 evaporators or sample concentrators, as part of the sample preparation process. This is achieved using wet or dry baths, and with or without heat and nitrogen blowdown options. Concentrated samples often provide better analysis results, especially when using instruments like LCs, GCs, LC-MS, GC-MS, and Elisa Readers.

SpeedoVap LV (Low Volume) Nitrogen Evaporator is a cutting-edge solution, revolutionizing sample concentration with its automated high-speed capabilities. Designed for efficiency, it provides a new alternative to traditional evaporation techniques. Key Features: • Efficiently evaporate up to 50 samples in a single batch. • Interchangeable racks for various tube types, accommodating sample volumes from 1.5 mL to 30 mL. • Micro-processor control ensures precise temperature maintenance during operation. • Gas control with selectable manifolds for customizable nitrogen flow based on sample quantity. • Automatic shutdown after completion, signalled by audio alarms. Applications: Ideal for the analysis of drug samples and pesticide extracts, SpeedoVap LV is commonly used for solvent evaporation. Its versatility accommodates sample volumes ranging from 1 mL to 30 mL, including GC vials, Eppendorf tubes, Ria vials, centrifuge tubes, and other test tubes. Nozzle Options: Supplied with fixed or disposable nozzles, SpeedoVap LV meets diverse laboratory needs. The rust-resistant Stainless Steel construction ensures durability, while labs working with highly corrosive chemicals can opt for specially coated anti-rust nozzles from Takahe Analytical Instruments®. The material of construction of the Nitrogen evaporator itself is aluminium which does not corrode in lab environments having an efficient exhaust system. Experience a streamlined and precise sample concentration process with SpeedoVap LV Nitrogen Evaporator. Whether your focus is drug sample analysis or pesticide extracts, this instrument offers unparalleled efficiency and flexibility. Trust in Takahe Analytical Instruments® for quality solutions tailored to your laboratory requirements. Technical Specifications :- Number of Samples to evaporate (Maximum) : 50 Max. sample volume : 30 mL Rack Supplied : Any one Rack listed (additional racks can be ordered separately) Water Bath Temperature : Ambient to 80 °C. (Up to 90°C if needed) Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas can be turned ‘ON’ for any / each of five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow required : 150 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz (110 VAC –available on request) Dimensions (WxDxH) : 25" x 14"x 13.25" (63.5 x 35.6 x 33.7 cm) Net Weight : 18 kg Shipping Weight : 25 kg Technology : Sample Vortexing Certifications : 2004/22/EC Measuring Instruments Directive, 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels. Gas control : Gas can be turned ‘ON’ for any/ each of five independent manifolds Racks available for the following test tube sizes Test Tubes 2 mL Flip/screw cap micro-centrifuge tubes . Eppendorf tubes 4 mL 12 X 75 / Ria Vials 4 mL 14 x 45 Screw Top Vial 12 mL 16 X 100 15 mL 17 X 125 30 mL 20 X 150

Tailored for users who prioritize cost-effectiveness without compromising essential functions, the SpeedoVap LX Nitrogen Evaporator is an affordable solution for small testing labs.It addresses the needs of users who seek reliable evaporation without the bells and whistles of high-end models. Ideal for Small Testing Labs this budget-friendly instrument is designed to meet the needs of users who do not require the high-end features found in most evaporators. Key Features: • Basic functions for efficient evaporation. • Budget-friendly pricing, ideal for small testing labs. • Retains essential features necessary for quality performance. Applications: Ideal for users who do not require advanced features, the SpeedoVap LX is well-suited for various applications in small testing labs. Conclusion: Experience the perfect balance of affordability and functionality with the SpeedoVap LX Nitrogen Evaporator. This budget-friendly solution caters to the needs of small testing labs, offering essential features for efficient evaporation without unnecessary complexities. __________________________________________________________________________________________________________________________________________________________ Technical Specifications Maximum Number of Samples : 30/50 Max. sample volume : 30 mL Rack Supplied : Any one Rack listed based on requirement. (optional additional racks can be ordered separately) Water Bath Temperature : Ambient to 80 °C. Timer Range : 1 min to 10 hours/indefinite Gas Supply Requirements : Min. inlet pressure 70 psi Max. inlet pressure 100 psi Gas can be turned ‘ON’ for any/ each of three/five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow Required : 90 Lpm/150 Lpm Exhaust : In-built ,1 m Duct hose provided Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH) : 25" x 14"x 13.25" (63.5 x 35.6 x 33.7 cm) Shipping Weight : 25 kg Certifications : 2004/22/EC Measuring Instruments Directive, 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels.

A game-changer in the CRO industry, the Bio-eVap 144 Position Nitrogen Evaporator is our significant contribution to large-scale bio-analytical studies. Designed to process 100 to 144 small volume samples simultaneously, this innovative evaporator ensures reproducibility, reduced Nitrogen consumption, and hands-free operation through cutting-edge technologies. Key Features: - Unattended operation with 144 sample capacity. - Dual pressure settings to eliminate contamination risk during the evaporation process. - In-built alarms with customizable settings, including over-temperature alert and door open sensor. - Interchangeable racks for different tube sizes. - Controlled water bath adjustable from ambient to 70°C. - Built-in nitrogen regulator for efficient operation. - LED display for better visibility under a fume hood. - Compact size for large sample processing in the same space as a 50-sample processor. - Removable nozzle tips for easy sonication, with no realignment required. - Option for fixed nozzle tips. - Safety features include audio and display alarms, auto-stop on door open, and exhaust options. Unique Features: - Set program cannot be changed once the process has begun. - Specially identified row selector switches for flow control. - Compatible rack for the Bio-eVap 144 can be used with TAKAHE SPE speX 144. - Printing and data storage facility available on request. Conclusion: Experience unparalleled efficiency and convenience in large-scale bio-analytical studies with the Bio-eVap 144 Position Nitrogen Evaporator. This cutting-edge system not only enhances reproducibility but also ensures contamination-free processing, making it an indispensable tool in the advancement of CRO research. Feature for Bio-eVap 100 position Nitrogen Evaporator :- Maximum Number of Samples/positions : 100 (Matrix: 10 X 10) Sample Volume : 1.5 mL, 4 mL, Upto 15 mL Rack Supplied : Any one Rack listed based on requirement. (additional racks can be ordered separately) Water Bath Temperature : Ambient to 70°C. Gas Supply Requirements : Inlet pressure 100 psi Gas Regulator : Manually adjustable Gas Flow required : 200 LPM Gas Gauge Range : 0 – 56 psi | 0-4 kg | 0- 3.9 bar Technology : Vortexing Dimensions (WxDxH) in cm : 37 X 70 X 25 | Open Door Ht: 68 cm Net Weight : 17 kg Shipping Weight : 30 kg Feature for Bio-eVap 144 position Nitrogen Evaporator :- Maximum Number of Samples/positions : 144 (Matrix: 12 X 12) Sample Volume : 1.5 mL, 4 mL, Upto 15 mL Rack Supplied : Any one Rack listed based on requirement. (additional racks can be ordered separately) Water Bath Temperature : 1 min to 9. 50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas Regulator : Initial and Final Pressure Manually set Gas Flow required : 260 LPM Gas Gauge Range : 0 – 56 psi | 0-4 kg | 0- 3.9 bar Technology : Vortexing Dimensions (WxDxH) in cm : 57 X 57 X28 | Open Door Ht: 68 cm Net Weight : 18.5 kg Shipping Weight : 35 kg Common Features : Gas Control : Each Manifold can be turned ON as required. No multiple punches on Keyboard Fume Extraction : Exhaust In-built, Vented out. Duct hose provided Power Requirements : 230 VAC at 50 Hz (110 VAC – available on request) Certifications : 2004/22/EC Measuring Instruments Directive. 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels. Test Tubes Capacity in mL Dimensions in mm (OD X H) 1.5 mL Eppendorf Micro Centrifuge tubes 4 mL Ria vials 11.5 X 75 mm 15 mL 16 mm X 120 mm 15 mL 15 mL Tarson tube (only for BV 100)