Embrace technological advancements in sample processing with the Duo-eVap 96 Well Plate Nitrogen Evaporator. Tailored for Diagnostic, BA BE and R&D labspreferring the 96 well plate format, this innovative solution by Takahe Analytical Instruments meets the ever-changing needs of laboratories through its dry heated gas evaporation technology. Key Features: • Versatile well plate evaporator suitable for 24 to 384 well microplates. • Available in both Open and Closed formats (Duo-eVap and SpeedoVap 96). • Dry evaporation process using heated gas from the top and below each well/tube. • Adjustable well-plates to accommodate various formats and volumes. • Gas and temperature controls on the front panel for simplicity and high visibility. • Easily removable gas manifold head and well plate bay for cleaning. • Removable gas needles for sonication or replacement as needed. Versatile Design: The Duo-eVap is suitable for various well plate formats, including 24, 48, 96, and 384 well microplates. It is designed and developed at our facilities to keep pace with technological and diagnostic advancements. Gas and Temperature Controls: Front-panel controls make gas and temperature adjustments simple and highly visible. The evaporation process utilizes dry heated gas from both the top and below each well or tube. Adjustable Well-Plates: Well-plates can be easily adjusted to accommodate different volumes and formats, providing flexibility for laboratories with diverse sample processing needs. Ease of Maintenance: The gas manifold head and well plate bay are designed for easy removal, facilitating straightforward cleaning. Gas needles are also removable, allowing for sonication or replacement as required. ___________________________________________________________________________________________________________________________________________________________ Technical Specifications :- Technology : Dry evaporation - Blowdown Capacity : One or 2 Well plates (Dual Duo-eVap) Well plate format : 24, 48, 96, 384 / Test tube Well plate Bay : One included as per requirement (Two for Dual Duo-eVap) Heating : Heated Nitrogen Operating Temperature : Max 60⁰C (upper) Max 75⁰C (Lower) Gas Supply Requirements : Min. inlet pressure 60 psi, Max. inlet pressure 100 psi Operating Flow Rate : 20-100 lpm X 2 Gas control : Single input Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH) : 9.25" x 17.0"x 23.0" ( 23.5 x 43.0 x 58.5cms ) Net Weight : 25 kg Shipping Weight : 35 kg

Adapting to evolving laboratory demands and projects requiring ultra-low sample volumes, the SpeedoVap 96WP (96 Well-plate) Nitrogen Evaporator is a cutting-edge solution. As an alternative to water-bath evaporators, this well-plate evaporator utilizes heated dry air for efficient solvent evaporation. Key Features: • Unattended operation for streamlined processing. • Configurable for well-plates of 1000μL and 2000μL capacities. • Controlled heated block adjustable from ambient to 70 °C. • Built-in nitrogen regulator for efficient operation. • LED display for enhanced visibility under a fume hood. • Compact size requiring no hood space. • Exhaust options open to the atmosphere or within a Fume Hood. • Alarms for various processes to draw user attention. • Small footprint for space-efficient lab setups. Operational Design: This closed hood well-plate evaporator employs a micro-processor to control and maintain the dry-block well-plate bay. Nozzles direct dry air into the wells for drying, with temperature and time settings for precise operation. Nitrogen gas, blown through nozzle manifolds into samples, automatically turns off after the process is completed. Audio alarms indicate completion. Applications: Ideal for diagnostic labs and research involving low volumes, the SpeedoVap 96 Well-plate evaporator is a valuable addition to testing labs seeking efficient and controlled sample processing. Conclusion: Experience the efficiency of ultra-low sample volume processing with the SpeedoVap 96WP Well Plate Nitrogen Evaporator. With its advanced features and unattended operation, this versatile solution is tailored for laboratories with dynamic demands, ensuring precision in solvent evaporation. Technical Specifications :- Maximum Number of Samples : 96 Well-plate Bay Supplied : One Well-plate Dry Block Temperature : Ambient to 70 °C. Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas control : Gas can be turned ‘ON’ for any / each of s Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow required : 170 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH): 17.25” X 13.5” X 11” (44 X 34 X 28 cms) Net Weight : 9.5 kg Shipping Weight : 15 kg Technology : Sample Vortexing Certifications : 2004/22/EC Measuring Instruments Directive, 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels.

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. Product Features • Available with compliance documents. • User adjustable orbit length (amplitude). • Time, RPM, Pulse Time (ON time as well as OFF time, both are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. • Easy Installation and operation • Aluminium Sample Platform for rust control • Incubator temperature selectable -controlled chamber • Easy Mounting and Removing of labware design • Maintenance Free Product Specifications RPM 10 to 300 (in Real Time) Timer 999 Minutes Pulse Yes Pulse On Off Time 999 Seconds Control Microprocessor Display 4-line 20-Character LCD White Backlite Supplied with Power cord / Rack Covers / Manual / QC Report Included QC docs with attached traceability Electric Requirement 230 V 50 Hz Single Phase 3 Amps Compliance Documents IQ OQ PQ can be provided on site Dimension LXWXH 50 X 20 X 26 CMS Product Weight 8 Kgs

Reciprocating Shaker Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. We have included a online RPM display, easy to programmer controller software, and easy to mount any type of laboratory glassware. Technical Specifications RPM/Stroke/ Range : 15 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 15mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Sample Platform : Platforms available for different lab glassware as mentioned below: Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing)

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence,they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. We have built in many features that make them different from the regular shakers available in the market. We have included an online RPM display, easy to programme controller software, and easy to mount any type of laboratory glassware. We manufacture these Shakers in India. The whole bouquet of shakers are available, Orbital, Reciprocating, Rocking, Dancing. • The orbit length, reciprocating stroke, and amplitude, etc is adjustable on site by the customer in all these shakers • Time, RPM, Pulse Time (ON time as well as OFF time, both are adjustable) all are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. These Free-Standing Shakers can be mounted with an incubator to maintain temperatures for the process. Technical Specifications RPM/Stroke/ Range : 10 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 8mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Power : 120 to 230 Volts Sample Platform : Various platforms available for different lab glassware Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing) *Does not include Glassware.

Product range for Nitrogen Evaporator : Nitrogen Evaporators are used to prepare samples for analysis. In a lot of industries, such as food, biotechnology, analytical chemistry, petroleum, and environmental science, nitrogen evaporators dry and concentrate samples so they can be tested with mass spectrometry, gas chromatography, and HPLC. It is also possible to use heat in conjunction with nitrogen blowdown to eliminate moisture from samples after they have been loaded into the nitrogen evaporator. Various Nitrogen evaporators are used such as one wet or dry baths, whether it needs hood space, and whether it provides heat and nitrogen blowdown to evaporate the samples. These come as 15 positions, 50 positions, High Volume 9 positions, End-point evaporators, 100 position Nitrogen Evaporators and 144 position Evaporators Sample preparation is an important part of the analysis using instruments like LCs, GCs, LC-MS, GC-MS, Elisa Readers. Part of sample preparation is concentration using Nitrogen Evaporators and Nitrogen Concentrator Sample Concentrators. Nitrogen Evaporators are also called N2 Evaporator or Sample Concentrator. Concentration of non-heat sensitive samples uses evaporation as a method to achieve best results. This concentrated sample gives better results when analysed. With individual laboratories using different samples, methods and analytical techniques, Takahe Analytical Instruments® are pioneers in Nitrogen Evaporators and Concentrators in India to meet the needs of the user and their applications. The product range allows evaporating samples from well-plates, test tubes, End points tubes, flasks and beakers. The product also is extended to evaporate large sample batches used in Phase II and Phase IV trials – typically the 100 position and 144 sample Nitrogen Evaporator Our forte lies in offering the user what he requires. Customisation of the product is done on specific customer needs. This customisation is undertaken after a feasibility study to ensure there is no compromise on the end result. Once a method is set, the automated operation of the SpeedoVap, Min-eVap, Bio-eVap, Duo-eVap and other range of our Nitrogen Evaporators and Concentrators frees up critical lab resources for other productive needs. Features of Speedovap N2 Evaporators : 1.Unattended operation for up to 50 samples 2.Different interchangeable N2 Evaporators racks available for tube sizes from 1.5 mL to 30 mL 3.Controlled water bath adjustable from ambient to 80 °C 4.Built-in nitrogen regulator 5.Different process and alert alarms 6.LED display for better visibility under fume hood 7.Convenient size—no hood space required 8.Exhaust open to atmosphere or within Fume Hood 9.Easy to use water drain pump 10.Small footprint FAQ's What is the lead time for delivery after placing order for N2 evaporator? - Our nitrogen evaporators are typically ex-stock and dispatched immediately. However, if there is a specific rack requirement, we will require 2-3 weeks time to meet the customized requirement. How Much Nitrogen Is Required to Evaporate Samples in A Nitrogen Evaporator? - Our 144-position nitrogen evaporator requires only 220 -250 lpm of Nitrogen (1.6 lpm) and our Speedovap 50 position requires 150lpm Nitrogen (3 lpm per nozzle) What sets your Nitrogen Concentrator Sample Evaporators apart from others in the market? - At Takahe Analytical Instruments, we take pride in several factors that distinguish our Nitrogen Evaporators from other brands in the market: 1. Decades of Experience 2. In-House Design and Manufacturing 3.Optimum Nitrogen Utilization 4.Commitment to Customer Service How are samples concentrated in the Nitrogen Evaporator? - Concentration of non-heat sensitive samples can be achieved through evaporation using nitrogen evaporators, also known as N2 evaporators or sample concentrators, as part of the sample preparation process. This is achieved using wet or dry baths, and with or without heat and nitrogen blowdown options. Concentrated samples often provide better analysis results, especially when using instruments like LCs, GCs, LC-MS, GC-MS, and Elisa Readers.

Tailored for users who prioritize cost-effectiveness without compromising essential functions, the SpeedoVap LX Nitrogen Evaporator is an affordable solution for small testing labs.It addresses the needs of users who seek reliable evaporation without the bells and whistles of high-end models. Ideal for Small Testing Labs this budget-friendly instrument is designed to meet the needs of users who do not require the high-end features found in most evaporators. Key Features: • Basic functions for efficient evaporation. • Budget-friendly pricing, ideal for small testing labs. • Retains essential features necessary for quality performance. Applications: Ideal for users who do not require advanced features, the SpeedoVap LX is well-suited for various applications in small testing labs. Conclusion: Experience the perfect balance of affordability and functionality with the SpeedoVap LX Nitrogen Evaporator. This budget-friendly solution caters to the needs of small testing labs, offering essential features for efficient evaporation without unnecessary complexities. __________________________________________________________________________________________________________________________________________________________ Technical Specifications Maximum Number of Samples : 30/50 Max. sample volume : 30 mL Rack Supplied : Any one Rack listed based on requirement. (optional additional racks can be ordered separately) Water Bath Temperature : Ambient to 80 °C. Timer Range : 1 min to 10 hours/indefinite Gas Supply Requirements : Min. inlet pressure 70 psi Max. inlet pressure 100 psi Gas can be turned ‘ON’ for any/ each of three/five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow Required : 90 Lpm/150 Lpm Exhaust : In-built ,1 m Duct hose provided Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH) : 25" x 14"x 13.25" (63.5 x 35.6 x 33.7 cm) Shipping Weight : 25 kg Certifications : 2004/22/EC Measuring Instruments Directive, 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels.

Introducing the Min-eVap Nitrogen Evaporator, a compact solution tailored for labs with low workloads and fixed requirements. Packed with features akin to the SpeedoVap LV, this mini nitrogen evaporator provides the convenience of low volume sample evaporation at an affordable cost, offering a swift alternative to traditional evaporation techniques. Key Features: • Unattended operation for up to 15 samples. • Interchangeable racks for tube sizes ranging from 1.5 mL to 15 mL. • Controlled water bath adjustable from ambient to 80 °C. • Built-in nitrogen regulator for efficient operation. • LED display for better visibility under a fume hood. • Compact size requiring no hood space. • Exhaust options open to the atmosphere or within a Fume Hood. • Easy-to-use water drain pump. • Alarms for various processes to draw user attention. • Small footprint, ideal for space-conscious environments. Applications: The Min-eVap is well-suited for small testing labs and educational institutions. Additionally, it finds great value in the food industry for in-house audits, facilitating the evaporation of solvents in the analysis of antibiotics, phenolics, and other pesticide extracts. Its versatility makes it ideal for sample volumes up to 15 mL, using Eppendorf tubes, Ria vials, or Tarson centrifuge tubes. Conclusion: Experience efficient and cost-effective low volume sample evaporation with the Min-eVap Nitrogen Evaporator. Whether in small labs or educational settings, this compact solution delivers uniform results with a fast turnaround time, making it an invaluable tool for various applications. ___________________________________________________________________________________________________________________________________________________________ Technical Specifications :- Maximum Number of Samples : 15 Max. sample volume : 15 mL Rack Supplied : Any one rack listed Water Bath Temperature : Ambient to 80 °C. (Up to 90°C if needed) Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas Control : Gas can be turned ‘ON’ for any / each of five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow required : 45 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH) : 17.25” X 13.5” X 11” (44 X 34 X 28 cms) Net Weight : 9.5 kg Shipping Weight : 15 kg Technology : Sample Vortexing Certifications : 2004/22/EC Measuring Instruments Directive 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels Racks available for the following test tube sizes 2 mL Flip/screw cap micro-centrifuge tubes/Eppendorf tubes 3 mL 10 X 75 4 mL 12 X 75 / Ria Vials 4 mL 14 x 45 Screw Top Vial 12 mL 16 X 100 15 mL 17 X 125

speX Series Solid Phase Extraction System for 48, 96 and 144 Positive Pressure Sample Processing Systems by Takahe Analytical Instruments Solid phase extraction — SPE is a chromatographic technique used to prepare samples for subsequent analysis by removing interfering substances that may be present. This is done either by retaining the substance of interest and washing off everything else or by retaining the interfering substances and eluting the product of interest. Takahe Analytical Instruments® specifically meets the requirements of BA/BE labs in the CRO industry for the extraction requirements. We offer a range of models of the Nitrogen Evaporators and Solid Phase Extraction Systems based on the application of the industry. Our systems offer seamless solutions for sample preparation of large batch volumes with the 100 and 144 position Nitrogen Evaporators and 96 and 144 sample Solid Phase Extraction using Positive Pressure Manifold systems. Unique features Aluminium body with high grade long-lasting powder coating. Light on hand Two Hand Operation for safety Dual flow settings - for extraction and drying. Inter-changeable racks for multiple size test tubes. Inter-changeable racks for 144 position Nitrogen Evaporator. Easy to use test tube tray. Even column processing times. Reproducible analyte recoveries. Lesser pre-process preparations. Convenient direct waste disposal. Dependable After Sales Service. Supplied with DQ/IQ/OQ/PQ documentation. Standard Warranty - One-year. Takahe Difference At Takahe we are constantly innovating to meet the requirements of the analyst to make her life a little simpler with fewer errors and faster processing. Like the Bio-eVAP 100 and 144 that we introduced in the market, we have enhanced the SPE 144 to make it simple for observing the elution of the large samples processed. This avoids arm fatigue as well as eliminates errors. Special Features of speX 144 series Positive Pressure Manifold has been first conceptualized, designed and manufactured by Takahe Analytical Instruments. The SPLIT cartridge rack and interchangeable COLLECTION Racks are our offerings in this process. Special features of speX 144 series Positive Pressure Manifold conceptualized, designed and manufactured first by Takahe Analytical Instruments. 144 split - cartridge rack *As a rack split into 3 section of 48, visibility of eluted samples is similar to the 48 position SPE system. *Lighter on the arms and easy handling *Can be loaded on benchtop without contaminating cartridges. Inter-changeble collection racks for 144 series *144 Collection rack fits the Bio-eVap nitrogen evaporator of Takahe Analytical Instruments *Evaporation rack from Bio-eVap fits into SPE *Saves transfer time *Eliminates errors