VTX Multi Tube Vortexer The Multi-Tube Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation. This vortex mixer gives a distinctly different motion than shaking a sample. With vortexing, greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility. The Multi-tube Vortexer is the equipment to provide that extra degree of mixing. However, a single system can accommodate full rack of tubes or micro well-plate, vials or cylinder as opposed to single tube vortexers. Features-: *Higher throughput mixing of samples. *Designed to hold multiple test tubes, vials, or cylinders. *Inter-changeable racks alows multiple sized tubes to be vortexed within the same system. *Suction-cup feet dampen motion and prevent sliding on the work surface. *Maintenance free silent BLDC motor. *Convenient size—no hood space required. *Exhaust open to atmosphere or within Fume Hood. *Easy to use water drain pump. *Alarms for various processes to draw attention of the user. *Small foot print. Sample Capacity Vortexer Mounts Different sample mounts/racks available as below (Can also be customised as per user requirement) 4 ml – 180 vials 1.5 ml – 256 tubes 15 ml – 50 tubes 50 ml – 18 tubes Technical Specifications Model name Type VTXM-Manual VTXA-Automatic Controls Microprocessor Controlled Microprocessor Controlled Setting of RPM Manual with Knob UP DN Arrow keys RPM Range 500 to 2700 LPM 500 to 3000 LPM Display LCD LCD Keyboard Settings NA Feather touch keys RUN Time setting NA Settable 1 to 999 min Elapsed Time Automatic Display Automatic Display Pulse Mode Not available Yes (settable ON OFF TIME) Electric Requirement 110 – 230 V AC 110 – 230 V AC Product Dimensions WDH in cms 26 X 26 X 25 WDH in cms 26 X 26 X 25 Weight 16 Kgs 16 Kgs

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. Product Features • Available with compliance documents. • User adjustable orbit length (amplitude). • Time, RPM, Pulse Time (ON time as well as OFF time, both are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. • Easy Installation and operation • Aluminium Sample Platform for rust control • Incubator temperature selectable -controlled chamber • Easy Mounting and Removing of labware design • Maintenance Free Product Specifications RPM 10 to 300 (in Real Time) Timer 999 Minutes Pulse Yes Pulse On Off Time 999 Seconds Control Microprocessor Display 4-line 20-Character LCD White Backlite Supplied with Power cord / Rack Covers / Manual / QC Report Included QC docs with attached traceability Electric Requirement 230 V 50 Hz Single Phase 3 Amps Compliance Documents IQ OQ PQ can be provided on site Dimension LXWXH 50 X 20 X 26 CMS Product Weight 8 Kgs

Reciprocating Shaker Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence, they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. Hence, we built in many features that make them different from the regular shakers available in the market. We have included a online RPM display, easy to programmer controller software, and easy to mount any type of laboratory glassware. Technical Specifications RPM/Stroke/ Range : 15 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 15mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Sample Platform : Platforms available for different lab glassware as mentioned below: Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing)

Shakers are laboratory equipment that provide a gentle oscillating motion to mix, agitate, or incubate samples in a variety of vessels such as tubes, flasks, and microplates. They are commonly used in biological, chemical, and pharmaceutical research, as well as in industrial applications such as food processing, cosmetics manufacturing, and environmental testing. Shakers are one of the integral equipment of a biotechnology and pharmaceutical laboratory. Hence,they require reliable and efficient equipment for sample preparation and analysis. Our shakers are designed to take your samples to the next level for analysis. We have built in many features that make them different from the regular shakers available in the market. We have included an online RPM display, easy to programme controller software, and easy to mount any type of laboratory glassware. We manufacture these Shakers in India. The whole bouquet of shakers are available, Orbital, Reciprocating, Rocking, Dancing. • The orbit length, reciprocating stroke, and amplitude, etc is adjustable on site by the customer in all these shakers • Time, RPM, Pulse Time (ON time as well as OFF time, both are adjustable) all are user selectable. • BLDC high wattage motor is used for low maintenance, and noise. • Gentle start ensures there is no sample spillage. These Free-Standing Shakers can be mounted with an incubator to maintain temperatures for the process. Technical Specifications RPM/Stroke/ Range : 10 to 300 Time Range : 1 Min to 999 Min Orbit/Stroke/Amplitude : 8mm to 50mm Display : 20 X 4 LCD High Brightness for Fume Hoods/Freezers Keys : 4 Nos Feather Touch Power : 120 to 230 Volts Sample Platform : Various platforms available for different lab glassware Well Plate – Positions 6 (Free Standing) Conical Flask 1000mL – Positions 4 (Free Standing) Conical Flask 250mL – Positions 9 (Free Standing) Separation Funnels 1000mL – Positions 2 (Free Standing) Separation Funnels 500mL – Positions 3 (Free Standing) Separation Funnels 250mL – Positions 5 (Free Standing) Ria Vials 4mL Test tubes – Positions 270 (Free Standing) Tarson Tubes 15mL – Positions 144 (Free Standing) Tarson Tubes 50 mL –Positions 81 (Free Standing) *Does not include Glassware.

SpeedoVap LV (Low Volume) Nitrogen Evaporator is a cutting-edge solution, revolutionizing sample concentration with its automated high-speed capabilities. Designed for efficiency, it provides a new alternative to traditional evaporation techniques. Key Features: • Efficiently evaporate up to 50 samples in a single batch. • Interchangeable racks for various tube types, accommodating sample volumes from 1.5 mL to 30 mL. • Micro-processor control ensures precise temperature maintenance during operation. • Gas control with selectable manifolds for customizable nitrogen flow based on sample quantity. • Automatic shutdown after completion, signalled by audio alarms. Applications: Ideal for the analysis of drug samples and pesticide extracts, SpeedoVap LV is commonly used for solvent evaporation. Its versatility accommodates sample volumes ranging from 1 mL to 30 mL, including GC vials, Eppendorf tubes, Ria vials, centrifuge tubes, and other test tubes. Nozzle Options: Supplied with fixed or disposable nozzles, SpeedoVap LV meets diverse laboratory needs. The rust-resistant Stainless Steel construction ensures durability, while labs working with highly corrosive chemicals can opt for specially coated anti-rust nozzles from Takahe Analytical Instruments®. The material of construction of the Nitrogen evaporator itself is aluminium which does not corrode in lab environments having an efficient exhaust system. Experience a streamlined and precise sample concentration process with SpeedoVap LV Nitrogen Evaporator. Whether your focus is drug sample analysis or pesticide extracts, this instrument offers unparalleled efficiency and flexibility. Trust in Takahe Analytical Instruments® for quality solutions tailored to your laboratory requirements. Technical Specifications :- Number of Samples to evaporate (Maximum) : 50 Max. sample volume : 30 mL Rack Supplied : Any one Rack listed (additional racks can be ordered separately) Water Bath Temperature : Ambient to 80 °C. (Up to 90°C if needed) Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas can be turned ‘ON’ for any / each of five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow required : 150 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz (110 VAC –available on request) Dimensions (WxDxH) : 25" x 14"x 13.25" (63.5 x 35.6 x 33.7 cm) Net Weight : 18 kg Shipping Weight : 25 kg Technology : Sample Vortexing Certifications : 2004/22/EC Measuring Instruments Directive, 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels. Gas control : Gas can be turned ‘ON’ for any/ each of five independent manifolds Racks available for the following test tube sizes Test Tubes 2 mL Flip/screw cap micro-centrifuge tubes . Eppendorf tubes 4 mL 12 X 75 / Ria Vials 4 mL 14 x 45 Screw Top Vial 12 mL 16 X 100 15 mL 17 X 125 30 mL 20 X 150

Wrist Action Separatory Funnel Shaker Takahe’s new addition to the sample preparation instruments is the Wrist Action Shaker also commonly known as the Separating Funnel Shaker. This shaker is efficient in shaking reagents of various kinds of materials under same control parameters. It is suitable for organic, inorganic chemical, medical, and pharmaceutical research, extraction & development of media, and waste water analysis. Up to 6 Funnels of different capacity (from 50 mL to 250 mL) can be fixed simultaneously with specially designed adjustable funnel holder. The BLDC motor is low noise and maintenance free, the acceleration is electronically buffered avoiding jerks, the RPM is dynamically displayed and the stop at the home position makes it easy to add solvents and release gas generated during the shaking process. Technical Specifications Maximum Number of Samples- 6 Sample volume- 50 mL to 1000 mL Max no. of samples / station- 3 Stroke per Minute- 15 to 150 Time- 1 to 999 Minutes Pulsed- On / Off Times can be set 0 to 999 Seconds Stroke Angle- Adjustable in 5 steps Mechanically Other Details Control Microprocessor Keys Tactile Switches BLDC Motor Noiseless and maintenance free Wattage 120 Watts Voltage 110 to 220 Volts

Product range for Nitrogen Evaporator : Nitrogen Evaporators are used to prepare samples for analysis. In a lot of industries, such as food, biotechnology, analytical chemistry, petroleum, and environmental science, nitrogen evaporators dry and concentrate samples so they can be tested with mass spectrometry, gas chromatography, and HPLC. It is also possible to use heat in conjunction with nitrogen blowdown to eliminate moisture from samples after they have been loaded into the nitrogen evaporator. Various Nitrogen evaporators are used such as one wet or dry baths, whether it needs hood space, and whether it provides heat and nitrogen blowdown to evaporate the samples. These come as 15 positions, 50 positions, High Volume 9 positions, End-point evaporators, 100 position Nitrogen Evaporators and 144 position Evaporators Sample preparation is an important part of the analysis using instruments like LCs, GCs, LC-MS, GC-MS, Elisa Readers. Part of sample preparation is concentration using Nitrogen Evaporators and Nitrogen Concentrator Sample Concentrators. Nitrogen Evaporators are also called N2 Evaporator or Sample Concentrator. Concentration of non-heat sensitive samples uses evaporation as a method to achieve best results. This concentrated sample gives better results when analysed. With individual laboratories using different samples, methods and analytical techniques, Takahe Analytical Instruments® are pioneers in Nitrogen Evaporators and Concentrators in India to meet the needs of the user and their applications. The product range allows evaporating samples from well-plates, test tubes, End points tubes, flasks and beakers. The product also is extended to evaporate large sample batches used in Phase II and Phase IV trials – typically the 100 position and 144 sample Nitrogen Evaporator Our forte lies in offering the user what he requires. Customisation of the product is done on specific customer needs. This customisation is undertaken after a feasibility study to ensure there is no compromise on the end result. Once a method is set, the automated operation of the SpeedoVap, Min-eVap, Bio-eVap, Duo-eVap and other range of our Nitrogen Evaporators and Concentrators frees up critical lab resources for other productive needs. Features of Speedovap N2 Evaporators : 1.Unattended operation for up to 50 samples 2.Different interchangeable N2 Evaporators racks available for tube sizes from 1.5 mL to 30 mL 3.Controlled water bath adjustable from ambient to 80 °C 4.Built-in nitrogen regulator 5.Different process and alert alarms 6.LED display for better visibility under fume hood 7.Convenient size—no hood space required 8.Exhaust open to atmosphere or within Fume Hood 9.Easy to use water drain pump 10.Small footprint FAQ's What is the lead time for delivery after placing order for N2 evaporator? - Our nitrogen evaporators are typically ex-stock and dispatched immediately. However, if there is a specific rack requirement, we will require 2-3 weeks time to meet the customized requirement. How Much Nitrogen Is Required to Evaporate Samples in A Nitrogen Evaporator? - Our 144-position nitrogen evaporator requires only 220 -250 lpm of Nitrogen (1.6 lpm) and our Speedovap 50 position requires 150lpm Nitrogen (3 lpm per nozzle) What sets your Nitrogen Concentrator Sample Evaporators apart from others in the market? - At Takahe Analytical Instruments, we take pride in several factors that distinguish our Nitrogen Evaporators from other brands in the market: 1. Decades of Experience 2. In-House Design and Manufacturing 3.Optimum Nitrogen Utilization 4.Commitment to Customer Service How are samples concentrated in the Nitrogen Evaporator? - Concentration of non-heat sensitive samples can be achieved through evaporation using nitrogen evaporators, also known as N2 evaporators or sample concentrators, as part of the sample preparation process. This is achieved using wet or dry baths, and with or without heat and nitrogen blowdown options. Concentrated samples often provide better analysis results, especially when using instruments like LCs, GCs, LC-MS, GC-MS, and Elisa Readers.

Introducing the Min-eVap Nitrogen Evaporator, a compact solution tailored for labs with low workloads and fixed requirements. Packed with features akin to the SpeedoVap LV, this mini nitrogen evaporator provides the convenience of low volume sample evaporation at an affordable cost, offering a swift alternative to traditional evaporation techniques. Key Features: • Unattended operation for up to 15 samples. • Interchangeable racks for tube sizes ranging from 1.5 mL to 15 mL. • Controlled water bath adjustable from ambient to 80 °C. • Built-in nitrogen regulator for efficient operation. • LED display for better visibility under a fume hood. • Compact size requiring no hood space. • Exhaust options open to the atmosphere or within a Fume Hood. • Easy-to-use water drain pump. • Alarms for various processes to draw user attention. • Small footprint, ideal for space-conscious environments. Applications: The Min-eVap is well-suited for small testing labs and educational institutions. Additionally, it finds great value in the food industry for in-house audits, facilitating the evaporation of solvents in the analysis of antibiotics, phenolics, and other pesticide extracts. Its versatility makes it ideal for sample volumes up to 15 mL, using Eppendorf tubes, Ria vials, or Tarson centrifuge tubes. Conclusion: Experience efficient and cost-effective low volume sample evaporation with the Min-eVap Nitrogen Evaporator. Whether in small labs or educational settings, this compact solution delivers uniform results with a fast turnaround time, making it an invaluable tool for various applications. ___________________________________________________________________________________________________________________________________________________________ Technical Specifications :- Maximum Number of Samples : 15 Max. sample volume : 15 mL Rack Supplied : Any one rack listed Water Bath Temperature : Ambient to 80 °C. (Up to 90°C if needed) Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Inlet pressure 100 psi Gas Control : Gas can be turned ‘ON’ for any / each of five independent manifolds Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Gas Flow required : 45 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz Dimensions (WxDxH) : 17.25” X 13.5” X 11” (44 X 34 X 28 cms) Net Weight : 9.5 kg Shipping Weight : 15 kg Technology : Sample Vortexing Certifications : 2004/22/EC Measuring Instruments Directive 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels Racks available for the following test tube sizes 2 mL Flip/screw cap micro-centrifuge tubes/Eppendorf tubes 3 mL 10 X 75 4 mL 12 X 75 / Ria Vials 4 mL 14 x 45 Screw Top Vial 12 mL 16 X 100 15 mL 17 X 125

For laboratories with specific requirements for solvent retention and reconstitution, the SpeedoVap Optical Endpoint Nitrogen Evaporator offers a tailored solution. Unlike standard High Volume Nitrogen Evaporators, this specialized instrument is designed for applications demanding precise endpoint volumes of 0.5 mL, 1 mL, or 2 mL. Key Features: • Unattended operation for endpoint evaporation as desired by user, eliminating the need for constant monitoring. • Controlled water bath adjustable from ambient to 80 °C. • Built-in nitrogen regulator for enhanced control. • LED display for better visibility under a fume hood. • Compact size, requiring minimal hood space. • Exhaust open to the atmosphere or within a fume hood. • Easy-to-use water drain pump with a small footprint. Unique Features: • Set program cannot be changed once the process has begun. • User-requested endpoint volume options at 0.5 mL, 1.0 mL, or 2.0 mL. • Individual process stops at each station as the endpoint is attained, ensuring precision. Endpoint Test Tubes: Specially designed endpoint test tubes, available in volumes of 100 mL or 200 mL and calibrated for 0.5 mL, 1 mL, 2 mL, and 100 mL or 200 mL for seamless reconstitution. Applications: Ideal for laboratories where a specific volume of solvent must be retained at the end of evaporation before analysis, the SpeedoVap Optical Endpoint Nitrogen Evaporator offers unparalleled control and precision. Conclusion: Experience unmatched accuracy and convenience in evaporation with the SpeedoVap Optical Endpoint Automatic Nitrogen Evaporator. Designed for precise endpoint volume control, this instrument streamlines processes for laboratories with specific solvent retention requirements. ___________________________________________________________________________________________________________________________________________________________ Technical Specifications :- Maximum Number of Samples : 6 Max. sample volume : 100 mL / 200 mL End Point Setting : As per test tube at 0.5 mL,1.0 ml or 2.0 mL Rack Supplied: One Rack with one pre-set endpoint supplied with system. For alternate requirement, connect with us. Water Bath Temperature : Ambient to 80 °C. Timer Range : 1 min to 9.50 hours/indefinite Gas Supply Requirements : Min. inlet pressure 70 psi Max. inlet pressure 100 psi Gas Regulator and Gas Gauge Range : Provided – manually adjustable. Station Control : Each station can be individually controlled at the programme start End point technology : Micro processor based, Optical sensors Gas Flow Required : 30 LPM Exhaust : In-built , Duct hose provided Power Requirements : 230 VAC at 50 Hz (110 VAC –available on request) Dimensions (WxDxH) : 25" x 14"x 13.25" (63.5 x 35.6 x 33.7 cm) Net Weight : 18 kg Shipping Weight : 25 kg Technology : Vortex Technology Certifications : 2014/35/EU Low Voltage Directive 2014/35/EU Low Voltage Directive 2009/105/EC Simple Pressure Vessels. ISO9001:2015 Gas control : Gas can be turned ‘ON’ for any/each of six independent stations Test Tubes (Dimensions as per catalogue or availability) Capacity in mL Dimensions in mm (OD X H) 100 mL 0.5 mL, 1 mL, 2.0 mL 200 mL 0.5 mL, 1 mL, 2.0 mL We also supply the End Point test tubes with calibration certificate.